Commercial Drywall & Steel Framing in Kansas City, MO
Kansas City Drywall Pros provides commercial drywall and steel framing services for new construction and renovation projects across the Kansas City area. We handle metal stud framing, drywall hanging and finishing, texture work, and acoustical ceiling services.
We just wrapped a project for an office tenant in Overland Park, KS that involved steel framing and drywall installation. We've built out large-scale partition systems and have a track record of doing the fundamentals right every single time.
A commercial buildout on a tight timeline doesn't wait for the wrong contractor to catch up. Call Kansas City Drywall Pros now, and let's get your space framed, finished, and ready for business.
Request a FREE Quote.
Our Commercial Drywall Services
Metal Stud & Steel Framing
We install light-gauge steel studs and tracks to form non-load-bearing interior walls, partitions, and soffits. Before fastening the framing, we check layout dimensions and coordinate openings for doors, utilities, and other building systems. Accurate placement helps keep walls plumb and gives drywall installers a consistent surface. Stud spacing, gauge, and track selection depend on project plans and wall requirements. We cut and secure members to suit the layout, then reinforce openings and connections where specified. For commercial spaces, coordination with electrical, plumbing, and mechanical trades helps keep framing clear of planned runs and reduces rework.
Commercial Drywall Installation
We install gypsum board on steel or wood framing for offices, retail spaces, tenant improvements, and other commercial interiors. Board type and thickness should match the project specifications, wall assembly, and applicable fire or moisture requirements. We also plan sheet orientation and joint placement to support a stable, even finish. Our crew measures and cuts panels around framing, doors, outlets, and service openings, then fastens them securely to the studs. Clean cuts and proper screw placement help prevent loose edges and surface damage during finishing. We coordinate installation with other trades so wallboard goes up after in-wall work is ready for inspection and concealment.
Commercial Taping, Mudding & Finishing
We embed joint tape in compound, cover fasteners, and apply successive coats to create smooth, continuous surfaces. Each coat needs time to dry before sanding and the next application. Rushing this process can leave ridges, visible seams, or uneven areas under paint and bright lighting. The finish level should suit the space and its final treatment. Smooth painted walls need careful feathering and sanding, while textured surfaces require a consistent pattern across repaired or newly boarded areas. We check corners, joints, and fastener locations under suitable lighting before the surface moves to primer or paint.
Commercial Ceiling Systems
We install commercial ceiling systems, including suspended grid ceilings and gypsum-board ceilings, based on the plans and room requirements. Suspended systems use a grid to support ceiling panels and provide access to utilities above. Drywall ceilings create a fixed surface that requires coordinated framing, board installation, and finishing. We lay out ceiling heights and grid lines with attention to lights, diffusers, sprinklers, and access panels. Coordinating these components before installation helps keep the finished ceiling orderly and serviceable. For drywall ceilings, we secure board to the framing and finish seams and fasteners to match the specified surface.
Specialty Assemblies
Fire-Rated Wall Assemblies
A fire-rated wall assembly must match a tested design for its required rating. The specified steel-stud size and spacing, gypsum board type and layers, fasteners, and joint treatment all affect the assembly. We follow the project documents and manufacturer details, including requirements for firestopping at penetrations and joints. Doors, outlets, ducts, and other openings need compatible rated components and careful detailing. Before installation, we review the plans for assembly types and transitions so crews can frame and board each wall as specified. This coordination helps keep the rated construction consistent where partitions meet ceilings, floors, and adjacent walls.
Sound-Rated (STC) Wall Assemblies
Sound-rated walls help reduce airborne noise between offices, meeting rooms, and other spaces. The specified assembly may use steel studs, insulation in the cavity, multiple layers of gypsum board, resilient channels, or other sound-control details. The right combination depends on the project’s target STC rating and wall configuration. Small gaps can weaken sound control. We pay close attention to perimeter joints, electrical boxes, doors, and penetrations, sealing them as the plans require. Where the design calls for decoupling, we keep finishes and fasteners from creating rigid connections across the assembly. We coordinate these details with mechanical and electrical trades before the wall closes.
ADA-Compliant Framing & Partitions
Accessible partitions require accurate layout around doorways, turning areas, and routes through the space. We use the construction documents to position walls and openings, then check that framing supports the specified clearances and hardware. In restrooms and similar spaces, blocking must align with grab bars and other mounted fixtures. Door locations, partition dimensions, and hardware affect access and usability. We coordinate framing with plumbing, electrical, and finish plans to avoid conflicts and preserve required clear floor space. Your project team should confirm dimensions and requirements against the applicable accessibility standards and approved plans before construction begins.
Commercial Project Types We Cover
Tenant Improvement (TI) Build-Outs
Tenant improvements reshape an existing commercial space for a new business or use. We install steel-stud partitions, drywall, soffits, and other interior features based on the approved plans, coordinating the work with trades such as electrical and plumbing. A clear scope helps keep the project moving. You’ll want to confirm wall locations, ceiling heights, finish levels, access hours, and any required fire-rated or sound-control assemblies before work begins. These details affect material choices, sequencing, and the finished layout.
New Commercial Construction
New commercial construction starts with framing that sets the dimensions and alignment for the interior. Our crew installs steel-stud walls and drywall according to project plans, coordinating with the general contractor and other trades as the building takes shape. Accurate layout matters at this stage. Door openings, service penetrations, backing for fixtures, and transitions between wall types should be planned before board installation. Early coordination helps reduce rework and supports a clean, consistent finish across offices, retail areas, and shared spaces.
Office & Retail Renovation
Office and retail renovations often need to work around existing conditions and business operations. We can frame new rooms, adjust partitions, repair damaged drywall, and prepare surfaces for paint or other finishes, with scheduling planned around site access and the renovation sequence. Before work starts, identify which areas must remain open, where dust control is needed, and how crews will move materials through the building. Confirming these logistics with your project team helps limit disruption and keeps the drywall work aligned with electrical, flooring, and finish trades.
Multi-Family & Apartment Complex Drywall
Multi-family projects depend on repeatable layouts and steady progress across many units. We install drywall and steel framing in apartments and shared areas, including corridors and amenity spaces, while coordinating unit-by-unit sequencing with the construction team. Sound control and fire-rated assemblies can be important between units and along common areas. Your plans should specify the required wall assemblies, insulation, and board types. Consistent installation and a clear punch-list process help the team track repairs and finishing across multiple units.
Why Choose the Pros for Commercial Drywall Work
Years of Getting It Right
Commercial jobs don't leave room for guesswork. Our guys have been at it for decades which means we know how to plan, execute, and finish work that actually holds up under daily use.
Framing to Finish, All in One Place
Light-gauge steel framing, drywall hanging, taping, sanding, finishing, all coordinated under one crew. That's fewer handoffs, fewer delays, and a wall built the right way from the start.
Built for the Space, Not a Template
Every commercial project is different, and we treat it that way. Practical planning and suitable materials mean the solution actually fits your space, not a one-size-fits-all approach.
Commercial Drywall & Steel Framing FAQs
Steel framing suits projects that need noncombustible, dimensionally stable interior partitions. It works well for offices, retail spaces, and other commercial interiors where the plans call for metal studs or framed walls.
We base pricing on the project’s size, framing and drywall quantities, wall and ceiling complexity, finish specifications, site access, and repair or preparation needs. Plans and a site review help us prepare an accurate estimate.
The schedule depends on the project’s size, layout, wall height, ceiling details, finish requirements, and access. We can estimate the timeline after reviewing the plans and site conditions.
Yes. We can plan work in occupied buildings around access needs and active business areas. The project team should coordinate work zones, delivery times, dust control, and any required temporary closures before work begins.
We offer smooth finishes and textured finishes, with the selected level depending on the wall’s use, lighting, and appearance requirements. We can also match an existing texture when repairs need to blend with surrounding surfaces.